How to Mark a Queen Bee in 4 Simple Steps (With Pictures)

Have you ever lost your keys or glasses while seated in a room that you know you haven’t left?

I mean, one second you have them, the next, you’re almost sure there’s a magic portal in your den where the scoundrels of other alternate universes reach in to steal your stuff and drive you crazy.

Well, looking for a queen bee can feel like that sometimes.

You’ve done your homework, you’ve checked to see that there are eggs, and the bees seem calm…so she must be in there.

It takes time and practice to spot a queen, and even seasoned beeks can have trouble spotting her sometimes. This is when taking the time to mark your queen bee proves to be especially helpful.

Should You Bother Marking Your Queen Bee?

You don’t have to, but you won’t regret it.

When you mark her, keeping tabs on her becomes much easier. In fact, the queen has a few subtle differences that separate her from her daughters which makes finding her tricky.

Her abdomen is slightly longer and sometimes a shade lighter.

If you take the time to observe her, she even walks a little differently. She has a royal gait, shall we say.

She moves a little slower, almost like she’s always inspecting the guard.

Her daughters are always making a fuss about her constantly, but she walks like she enjoys the attention.

Unfortunately, her royal gait won’t scream at you from the safety of her location.

Let’s not forget that once you open the hive, the bees may even walk over her to hide her from you.

For those times when you need to confirm that she’s physically there, you will need all the help you can get.

Sure, the first time or two you can get someone to point her out and show you the ropes.

Unfortunately, your schedules may not always be synchronized. When you mark the queen bee, you really speed up the process of locating her.

Marking Her is Also a Quick Way to Determine the Age of Your Queen

If you’ve started to notice failing populations, a quick look at the color used to mark your queen will help with a possible diagnosis.

As a hobbyist, you probably won’t need to requeen often, and it will be based on the needs of the individual colonies rather than the apiary as a whole.

That will require you to keep some kind of record of each queen individually.

You may also notice that the temperament of the hive has changed. Depending on where your apiary is located, you will want to confirm that your queen hasn’t been replaced.

Sometimes queens are superseded by the colony, which happens when they find her performance insufficient and replace her.

Sometimes your colony swarms and your original queen sets off to begin a new life with some of her girls.

Alternatively, your queen could be usurped. That’s when a colony decides to invade a hive, but they don’t rob it.

The intention is to kill the old queen and install their queen as the new egg layer, and her workers, as well as the survivors of the original colony, begin a new life. This is different from swarming.

A new swarm will probably move into an unoccupied space in the spring. That’s because the environment provides enough food for them to start their new empire.

A swarm that goes house hunting in the summer is already operating at a disadvantage because most of the flower blooms are gone and leave seeds and fruit that look appetizing enough, but not if you’re a bee.

In all three circumstances, you could lose the genetic advantage you sought when you were sourcing your queen the first time around.

Before you go ahead and assume that there has been a coup in the hive, you should find the queen.

If your marked queen is still around, then you know that your bees are probably just having a bad day, and give them a chance to calm down.

You probably chose the wrong day to check in with them.

It could be very humid, or very cold or they had an uninvited guest, like a skunk trying to pry open the hive the previous night.

If you find the queen, and she’s not marked, then the genetic change might explain the change in behavior.

That said, you’ll need to give it a few more visits just to be sure it’s not another reason because local queens can be a great asset.

Queen Bee Marking Colors

Queen Bee Marking Colors

The principle around this chart is that by glancing at the queen, you not only confirm if she is your original queen but also how old she is.

Sometimes queens can live past 5 years but it is rare.

Therefore, the colors on the chart rotate every 5 years.

The colors are White, Yellow, Red, Green, and Blue. The rules are as follows:

  • Years ending in 1 and 6 – White
  • Years ending in 2 and 7 – Yellow
  • Years ending in 3 and 8 – Red
  • Years ending in 4 and 9 – Green
  • Years ending in 5 and 0 – Blue

In order to remember the system, there’s a pneumonic that may help you remember. Will You Rear Good Bees.

If that doesn’t work for you, make one up for yourself. Mine is “Watering Your Roses Gets Bees”.

Is it clever? No. But it does help me remember.

If you’re out of a certain color, you can replace it with another but you need to document it.

That way, when you come across your purple queen, you can still work out how old she is.

How to Mark a Queen Bee Step by Step

Step 1: Spot her

Mark Queen Bee Step 1

Finding her is going to be your first hurdle. There are a few tricks to this.

First, she’s likely to be on the frame with the most bees.

When you find that frame, remove it and check it thoroughly.

Of course, she can be a little trickster and she may hop to the next one but it’s a great place to start and will reduce the search time.

You will also observe that the bees around her behave differently.

She walks like royalty and can almost be described as elegant. You may even notice that the worker bees will get out of her way.

These are all subtle signs but when you combine that with her different physical attributes, it makes it easier to find her.

Step 2: Isolate her

There are several ways to do this.

Fingers

The first is using your fingers. There is a method to this, however.

Unlike picking up a worker bee, if you get this wrong and squish her, you do not get a do-over.

You have to be very gentle as you grip and immobilize her. Since this is a very delicate procedure, it is best done without gloves.

Latex gloves can be used if there is great need.

Push-in Cage

The other option is to use a push-in cage.

This is simply a disc with some mesh attached to some sharp prongs that help to keep the disc in place when pushed through comb.

The prongs do not allow the queen to escape because her abdomen is larger than that of the other bees.

Queen Catcher

The final option is the use of a nifty little contraption called a queen catcher.

It looks a little like a lady’s hairclip.

Once you’ve located her on the comb, you squeeze the handles to open the catcher and then place it above her and then let it close.

There’s a little gap at the bottom when it closes so you don’t need to worry about ripping off one of her limbs.

The catcher has holes that allow the workers to escape but the queen can’t pass through so she remains secure.

Step 3: Make your mark

Mark Queen Bee Step 3

We’ll cover this in the same order we did the isolation section.

Fingers

If you chose to use your bare hands, then you will need to hold the queen by her legs.

This means that you let her grip your index finger and then you use your thumb and middle finger to hold her legs in place.

Then use your other hand to apply the paint to the top center of the thorax.

Make sure you get the paint on the hard surface, not just the hairs on it otherwise the paint won’t last.

Push-in Cage

If you are using the push-in cage, then you need to push it down until her movement is restricted. Remember not to push too hard.

Once she’s in place, use your marker to paint her. You’ll need to keep her there for a minute or two for the paint to dry, then you can release her.

Queen Catcher

Finally, if you used the queen catcher, then there are some additional tools you may choose to use to do the marking.

It’s known as a queen marking tool.

A queen marketing tool works like a syringe, except that instead of a needle, you have an open tube with a mesh and a plunger with a sponge on the inner surface.

The principle is the same as that of the push-in cage, in that you drop the queen into the tub and insert the plunger.

Get the queen on the plunger with her legs on the sponge and slowly push the plunger to the mesh.

The sponge helps to protect her while keeping her fixed in one position.

Then you place your mark on her thorax which is now pressed against the mesh.  Once done, give her a little wiggle room by pulling down the plunger a little bit.

Keep her in the tube for a few minutes to make sure the paint dries.

Step 4: Release

This whole process takes just a few minutes so there’s no need to worry about rejection.

If you used the queen marking tool, You simply open up the hive, place the tube with her in it on top of the frames containing brood on its side and let her walk out into the hive.

Then retrieve your tube and close up.

Conclusion

Queen marking is a good way to monitor the performance of your queens and takes just a few minutes to do.

It gets easier each time you do it.

Leave a Comment